Reflection of Light Class 9 Science Notes Maharashtra State Board
Light is an agent which gives us information about what is happening in our surroundings. We can enjoy various wonders of nature like the sunrise, sunset, and rainbow only because there is light. Only because of light can we see the lush green vegetation, colourful flowers, deep blue skies in the day, and stars shining in the night sky in the beautiful world around us. We can see the man-made objects in our surroundings as well. Light is electromagnetic radiation which causes the sensation of vision. Light reflects differently from the various surfaces around us. We have already learned that the reflection from smooth, flat surfaces is regular while rough surfaces reflect light irregularly.
Mirrors and Types of Mirrors
We need polished surfaces for reflecting light. This is because polished surfaces absorb less light, so maximum light gets reflected. In scientific language, a surface that reflects light and creates clear images is called a mirror. A mirror is a reflecting surface. We use various types of mirrors in our daily life. Mirrors are of two types: plane mirrors and spherical mirrors.
Plane Mirror:
Plane mirrors are used in various activities in our day-to-day life. A mirror is made by coating a flat, smooth glass piece’s back surface with a thin, reflecting film of aluminium or silver. To protect this reflecting film and to make that side opaque, another coat of a substance like lead oxide is given over it.
We see a clear image of ourselves when we stand in front of a mirror in our house. To understand how an image is formed in a mirror let us first consider an image formed by a point source. Light rays travel in all directions from such a source. Several of these rays fall on the mirror, get reflected, and reach our eyes. Due to reflection, they appear to be coming from a point behind the mirror. That point is the image of the point source. As Figure A shows, light rays falling perpendicularly on the mirror are reflected in the perpendicular direction.
Figure B shows a point source O in front of the plane mirror M1M2. Incident rays OR1 and OR2 get reflected according to the laws of reflection along paths R1S1 and R2S2 respectively. When these reflected rays are extended behind the mirror, they meet at O1. When seen from E, the rays appear to be coming from O1. Other rays starting from O also get reflected and appear to be coming from O1. Thus, point O1 is the image of point O.
The reflected rays do not meet. Hence, such an image is called a virtual image. The perpendicular distance of the image from the mirror is equal to the perpendicular distance of the source from the mirror.
If we use an extended source instead of a point source, an image is formed of every point of the source, thereby forming an extended image of the whole source. As shown in Figure C, an extended source PQ is kept in front of the mirror M1M2. The images of P and Q are formed at P1 and Q1 respectively. Similarly, images of all points between P and Q are formed between P1 and Q1 resulting in the image P1Q1 of the entire extended source. The image formed by a plane mirror is of the same size as the source.
The image of a word appears laterally inverted in the mirror. The image of every point on the word is formed behind the mirror at the same distance from the mirror as the point itself. This is called lateral inversion.
Statement: To see the full image of a person standing in front of a mirror, the minimum height of the mirror must be half the height of the person.
Proof: In Figure, the point at the top of the head, the eyes, and a point at the feet of a person are indicated by H, E, and F respectively. R and S are midpoints of HE and EF respectively. The mirror PQ is at a height of NQ from the ground and is perpendicular to it. PQ is the minimum height of the mirror to obtain the full image of the person.
For this, RP and QS must be perpendicular to the mirror. Find out why, by studying the figure.
Minimum height of the mirror PQ = RS
= RE + ES
= \(\frac{H E}{2}+\frac{E F}{2}\)
= \(\frac{\mathrm{HF}}{2}\)
= Half of the person’s height
Spherical Mirrors
You must have seen the mirrors displayed in the Laughing Chamber at a fair. Your face appears distorted in these mirrors. Why does this happen? These mirrors are different from the mirrors we have at home. They are curved. The images formed by curved mirrors are different from those formed by plane mirrors. Because of this, we do not see the familiar images in these mirrors. The rearview mirrors in cars, which enable drivers to see the vehicles coming from behind, are curved.
If we cut a rubber ball into two parts as shown in Figure, we can see that each of the two parts has two types of surfaces.
Generally, spherical mirrors are parts of a hollow glass sphere like part B in the figure. The inner or outer surface of this part is coated with a shiny substance to produce a spherical mirror. Reflection of light takes place either from its outer or inner surface. Thus, there are two types of spherical mirrors as described below.
- Concave mirror: If the inner surface of the spherical mirror is the reflecting surface, then it is called a concave mirror.
- Convex mirror: If the outer surface of the spherical mirror is the reflecting surface then it is called a convex mirror.
Terms Related to Spherical Mirrors
Pole:
The center of the mirror surface is called its pole. P is the pole of the mirror in Figure.
Centre of Curvature:
The center of the sphere of which the mirror is a part is called the center of curvature of the mirror. C is the center of curvature of the mirror in the figure.
Radius of Curvature:
The radius of the sphere of which the mirror is a part is called the radius of curvature of the mirror. The length CP or CA in the figure is the radius of curvature of the mirror.
Principal Axis:
The straight line passing through the pole and center of curvature of the mirror is called its principal axis. PM is the principal axis of the mirror in the figure.
Principal Focus:
Incident rays which are parallel to the principal axis of a concave mirror, after reflection from the mirror, meet at a particular point in front of the mirror on the principal axis. This point (F) is called the principal focus of the concave mirror. In the case of a convex mirror, incident rays parallel to the principal axis, after reflection, appear to come from a particular point behind the mirror lying along the principal axis. This point is called the principal focus of the convex mirror.
Focal Length:
The distance (f) between the pole and the principal focus of the mirror is called the focal length. This distance is half of the radius of curvature of the mirror.
Drawing the Reflected Rays
How do we determine the direction that an incident ray will take after reflection from a spherical mirror? In Figure, MN is a spherical mirror and ray AQ is incident on it. CQ is a radius and therefore is perpendicular to the mirror at Q. Thus, angle AQC is the angle of incidence. According to the laws of reflection, the angle of incidence and the angle of reflection are of the same measure. Thus, while drawing the reflected ray QB, the angle CQB must be equal to the angle AQC.
We can study the images produced by spherical mirrors by drawing ray diagrams. A ray diagram is a depiction of the path taken by light rays. To draw a ray diagram, we use the following rules, which are based on the laws of reflection of light. (See Figure).
- Rule 1: If an incident ray is parallel to the principal axis then the reflected ray passes through the principal focus.
- Rule 2: If an incident ray passes through the principal focus of the mirror, the reflected ray is parallel to the principal axis.
- Rule 3: If an incident ray passes through the center of curvature of the mirror, the reflected ray traces the same path back.
Images Formed by a Concave Mirror
Material: Candle or glass lamp, two cardboard boxes, large cardboard sheet, white paper, concave mirror, meter ruler, wooden block.
Action: Take the cardboard box, large enough to hold the candle or lamp. Cut off one side and place the candle inside. Cut out an arrow-shaped slit from one side, so that we get an arrow-shaped light source. Make a screen of size 20 cm × 30 cm by sticking white paper on the cardboard sheet and setting it up vertically with the help of the wooden block. Fix the mirror vertically on the other cardboard box by making a slit on its top surface.
Place the screen near a window and place the mirror in front of it such that the image of the sun or some far-away object forms clearly on the screen. Measure the distance between the screen and the mirror in this situation. This is the focal length of the mirror. Set up the experiment as shown in the figure, in a dark room. Place the mirror near the 0 mark on the meter scale. Place the screen in front of it and place the light source in between the two so that the distance between the mirror and the source is a little more than the focal length of the mirror.
Obtain a clear image of the source on the screen by moving the screen along the meter scale and perpendicular to it. The image will be inverted and larger than the source. As the image is obtained on the screen, it is a real image. Now move the source away from the mirror so that the distance between the two is greater than twice the focal length of the mirror. Get a clear image on the screen by moving it towards the mirror. The image is inverted, smaller than the object, and real.
As shown in Figure A, object AB is placed between the focus and the center of curvature of the concave mirror MN. The incident ray AQ, starting from A, and going through the focus F, becomes parallel to the principal axis after reflection and returns along QR. The incident ray AS, parallel to the axis, after reflection passes through the focus and returns along the path ST. It cuts the reflected ray QR at point A1. Thus, the image of A is formed at A1. The point B is situated on the principal axis and so its image will also be on the axis and will be directly above A1. Thus the image of B is at B1. The images of points between A1 and B1 will be formed between points A1 and B1. Thus, the image of object AB is A1B1. From this, we see that when the object is placed between the focus and the center of curvature of the mirror, the image is formed beyond the center of curvature. This image is larger than the object and is inverted. As the reflected rays cross each other, the image is a real image and can be obtained on a screen.
In Figure B, an object AB is placed between the pole and the focus of the mirror. The incident ray AQ is parallel to the principal axis and the incident ray AS is in the direction joining A with the center of curvature. The figure shows how these rays get reflected and form the image A1B1 of the object. This image is behind the mirror, erect and larger than the object. As the reflected rays do not meet but appear to come together behind the mirror, the image is virtual. The position and type of the image produced by a concave mirror when an object is placed at different distances from it are given in the following table.
Images formed by Concave Mirrors
| Position of the Object | Position of the Image | Nature of Image | Size of the Image |
| 1. Between pole and focus | Behind the mirror | Erect, virtual | Magnified |
| 2. At the focus | At infinity | Inverted, Real | Very Large |
| 3. Between focus and center of curvature | Beyond the center of curvature | Inverted, Real | Magnified |
| 4. At the center of curvature | At the center of curvature | Inverted, Real | Same as the object |
| 5. Beyond the center of curvature | Between the center of curvature and focus | Inverted, Real | Diminished |
| 6. At a very large (infinite) distance | At focus | Inverted, Real | Point Image |
The image formed by a Convex Mirror
Figure shows an object AB kept in front of a convex mirror MN. Incident rays AQ, starting from A and traveling parallel to the axis, and AR going towards the center of curvature are shown. How these get reflected and form the image A1B1 can be understood from the figure. The image is smaller than the object, behind the mirror and erect. As the reflected rays do not cross one another, the image is virtual.
The nature of the image formed by a convex mirror does not depend on the distance of the object from the mirror. These images are always virtual, smaller than the object, and situated behind the mirror.
Divergence and Convergence of Light
A. Take 5 sticks from a matchbox. Arrange them so that their heads come together at a point. In this arrangement, the heads of the matchsticks are said to have converged.
B. Now arrange the sticks so that their uncoated ends are together at a point. The heads are spread apart. In this arrangement, the heads are diverging from the point.
A concave mirror is also called a focusing mirror. This is because, as shown in Figure A, parallel rays get focused after reflection in this mirror. The size of the image produced by these mirrors can be larger or smaller than the object, depending upon the distance of the object from the mirror.
A convex mirror is also called a dispersing mirror. This is because, as shown in Figure B, parallel incident rays get dispersed after reflection in this mirror. The size of the images produced by these mirrors is always smaller than the size of the objects.
How will you find out if a Mirror is Concave or Convex?
The special mirror which is used for shaving is concave. When held close to the face, it gives a vertical and larger image of the face. If the same mirror is taken farther away from the face, the image gets smaller and smaller. The mirrors used in cars and motorcycles are convex mirrors. In these mirrors, the image of a face is erect and smaller and it remains erect but becomes smaller and smaller when the mirror is taken away from the face. As a result, we can see the images of the surroundings also in the mirror. Thus, we can determine the nature of the mirror by studying the images produced by them. When the light rays coming from an object enter our eyes, we can see the object because, while passing through the lenses in our eyes, the rays converge, and the image of the object forms on the retina of our eye. This image, formed by the light rays converging at a point, is a real image. A real image can be obtained on a screen.
The image produced by a plane mirror is virtual. This image is produced at a point from which the reflected light rays appear to diverge (figure B). This image cannot be obtained on a screen as the rays do not meet there. When light rays collect at a point after reflection from a spherical mirror, they are said to converge there. When we want to bring light rays together at a point, a converging light beam is used. Doctors use such a beam to converge light on a tooth, ear, nose, etc. Equipment using solar energy also uses converging light. When light rays starting from a point spread out after reflection by a spherical mirror, light is said to have diverged. When we want light rays to spread out from a source, a divergent beam is used, as, in street lamps.
Uses of Concave Mirrors
- Barbershop, dental hospital – If the object is placed between the pole and the focus of the mirror, an erect, virtual, and magnified image is obtained
- Torch and headlamps of vehicles – The source of light is kept at the focus of the mirror. Thus, a parallel beam of light is obtained.
- Floodlights – The source of light is placed a little beyond the center of curvature of the mirror. This gives a bright beam of light.
- Various equipment using solar energy – Sun rays reflected by a concave mirror come together in the focal plane.
Uses of Convex Mirrors
- Mirrors on the sides of cars are convex mirrors
- Big convex mirrors are fitted in shops.
According to the Cartesian sign convention, the pole of the mirror is taken as the origin. The principal axis is taken as the X-axis of the frame of reference. The sign conventions are as follows.
- The object is always kept on the left of the mirror. All distances parallel to the principal axis are measured from the pole of the mirror.
- All distances measured towards the right of the pole are taken to be positive, while those measured towards the left are taken to be negative.
- Distances measured vertically upwards from the principal axis are taken to be positive.
- Distances measured vertically downwards from the principal axis are taken to be negative.
- The focal length of a concave mirror is negative while that of a convex mirror is positive.
Mirror Formula
We get the correct values of distances by using the Cartesian sign convention. The object distance (u) is the distance of the object from the pole, while the image distance (v) is the distance of the image from the pole. The relationship between the object distance, image distance, and the focal length (f) is called the mirror formula. The mirror formula is expressed as follows:
\(\frac{1}{\mathrm{v}}+\frac{1}{\mathrm{u}}=\frac{1}{\mathrm{f}}\)
This formula is valid for all spherical mirrors, for all positions of objects, under all circumstances.
Magnification due to Spherical Mirrors
The magnification due to a spherical mirror is given by the ratio of the height of the image (h2) to the height of the object (h1). This tells us how large the image is as compared to the object.
Magnifiction M = \(\frac{\text { Height of the image }}{\text { Height of the object }}=\frac{h_2}{h_1}\)
From this it can be shown that M = \(-\frac{\mathrm{v}}{\mathrm{u}}\)
As the object is always kept above the principal axis, its height is always taken to be positive. For virtual images, the height is positive while for real images, it is negative. As the object is kept on the left of the mirror, its distance (u) is always negative.
The image in front of the mirror which can be obtained on a screen is called a real image. For any position of the object, a convex mirror always produces an erect diminished image (which is smaller than the object) and is situated behind the mirror. The image that is behind the mirror and thus cannot be obtained on a screen is called a virtual image. The magnification of such an image is less than 1.
Well-organized Maharashtra State Board Class 9 Science Notes Reflection of Light can aid in exam preparation and quick revision.